- Hardware - dgp mailing lists

5180 Training session Thursday Feb. 22nd 3:30 pm
by John Hancock 16 Feb '18

16 Feb '18

Hi Everyone, I will be doing an updated hardware training session on Thursday, Feb 22nd at 3:30 pm. This is an update, so not required for those who already have access but recommended as we will be reviewing useful information about the new 3d printer, how to print to it remotely and how to dispose of cleaning station fluid correctly, as well as some laser cutter tips. For people without room access, it will be enabled for those who attend the training, subject to faculty approval. If you do not have access to the dgp wiki (https://www.dgp.toronto.edu/dgpwiki/5180MonitorAndCleanup) please let me know. Thanks, -John

1 0

Service to F170 finished
by John Hancock 23 Jan '18

23 Jan '18

Hi Everyone, The F170 Stratasys printer has been serviced and the warning cleared from the printer. -John

1 0

F170 service call tomorrow
by John 02 Jan '18

02 Jan '18

Hi Everyone, The Y-Axis motors are being replaced in the F170 tomorrow, so the 3-D printer will be unavailable during the replacement and testing period (9 or 10 in the morning on). Given the power outage in the evening and the time it requires to check a print job, the printer will likely be unavailable through until Thursday. -John

1 0

5180 Training session Friday Dec. 15th, 1:30 pm
by John Hancock 14 Dec '17

14 Dec '17

Hi Everyone, I will be doing an updated hardware training session on Friday Dec 15th at 1:30 pm. This is an update, so not required for those who already have access but recommended as we will be reviewing useful information about the new 3d printer, how to print to it remotely and how to dispose of cleaning station fluid correctly, as well as some laser cutter tips. For people without room access, it will be enabled for those who attend the training, subject to faculty approval. If you do not have access to the dgp wiki (https://www.dgp.toronto.edu/dgpwiki/5180MonitorAndCleanup) please let me know. Thanks, -John

1 0

3d Printer outage Friday Dec 1 (8:30 am to 10 am)
by John Hancock 30 Nov '17

30 Nov '17

What's happening: A service tech is coming to repair the Stratasys F170 printer. Who will be Affected? Any overnight/morning jobs that go beyond 8:30 am will be cancelled. Make sure you do not schedule a job for this period. When? Friday December 1st, 2017 at 9 am Why? Stratasys thinks there is a problem with the y1, y2 axis belts that requires an adjustment. I have questions Please send email to dgplab(a)dgp.toronto.edu .

1 0

Stratasys Tutorial Video on-line
by John Hancock 09 Nov '17

09 Nov '17

Hi Everyone, During the on-site training we shot video of the software, 3d printer and cleaning station walk-through with the technician. We've added this to the dgp website here: http://www.dgp.toronto.edu/3dprint I would recommend reviewing parts of the software tutorial about model placement and material usage, since this will help you speed up your print jobs. -John

1 0

Spool Swaps in the F170
by John Hancock 03 Nov '17

03 Nov '17

Hi Everyone, As I mentioned in the refresh session yesterday, please run the ABS and QSR spools until they are empty in the F170 Stratasys printer. Your print job will pause until the spool is changed, and then will continue once the spool has been swapped. Swapping early means more swaps for additional builds, which delays future print jobs for others. It also leads to waste where reels are recycled before they have used all the material. We've been getting the same colour to allow us to keep using the spools until they are finished. The ABS material is very expensive compared to the PLA costs, and we don't want to waste any more than we have to. Please make sure that we use all the QSR support and ABS before switching spools. -John

1 0

5180 Training session Thursday Nov. 2nd 2:30 pm
by John Hancock 02 Nov '17

02 Nov '17

Hi Everyone, I will be doing an updated hardware training session on Thursday, Nov 2nd at 2:30 pm. This is an update, so not required for those who already have access but recommended as we will be reviewing useful information about the new 3d printer, how to print to it remotely and how to dispose of cleaning station fluid correctly, as well as some laser cutter tips. For people without room access, it will be enabled for those who attend the training, subject to faculty approval. If you do not have access to the dgp wiki (https://www.dgp.toronto.edu/dgpwiki/5180MonitorAndCleanup) please let me know. Thanks, -John

1 1

Workshop Monitor -- rotation list
by Nicole Sultanum 03 Aug '17

03 Aug '17

Hi folks, To facilitate the weekly monitor change process, I included a table to the wiki page with emails of all current members of this mailing list, and when each has volunteered as monitor. I added names for the people I know -- if your name isn't there, please add it. http://www.dgp.toronto.edu/dgpwiki/5180MonitorAndCleanup [image: Imagem inline 1] Hopefully this will ensure a more equal distribution of labour, facilitate the work of finding the next monitor, and reduce mail spam :) I suppose this could also be used for people to volunteer on future weeks that are more convenient to them. Would be nice to have a self-defined monitor line-up. Cheers, Nicole

1 0

Hardware lab training session,Tuesday July 18th, 11 am
by John Hancock 18 Jul '17

18 Jul '17

Hi Everyone, We will be doing a training session for the equipment in the hardware lab in 5180 on Tuesday July 18th at 11 am. Room access will be enabled for those who attend the training, subject to faculty approval. If you do not have access to the dgp wiki (https://www.dgp.toronto.edu/dgpwiki/5180MonitorAndCleanup) please let me know. Please email jhancock@dgp if you have any questions. Thanks, -John

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Hardware