- Hardware - dgp mailing lists

Hardware lab training session, Fri Aug 16th 2 pm
by John Hancock 15 Aug '19

15 Aug '19

Hi Everyone, We will be doing a training session for the equipment in the hardware lab in 5180 on Friday August 16th at 2:00 pm . This is an update, so not required for those who already have access but recommended as we will be reviewing useful information about the 3d printers (Ultimaker, Stratasys and Form), how to print to it remotely and how to dispose of cleaning station fluid correctly, as well as some laser cutter tips. We will also be covering how to use the equipment in the seminar room. Room access will be enabled for those who attend the training, subject to faculty approval. If you do not have access to the dgp wiki (https://www.dgp.toronto.edu/dgpwiki/5180MonitorAndCleanup) please let me know. Please email jhancock@dgp if you have any questions. Thanks, -John

1 0

Hardware lab training session, Wed May 29th 1 pm
by John Hancock 27 May '19

27 May '19

Hi Everyone, We will be doing a training session for the equipment in the hardware lab in 5180 on Wednesday May 29th at 1pm . This is an update, so not required for those who already have access but recommended as we will be reviewing useful information about the new 3d printer, how to print to it remotely and how to dispose of cleaning station fluid correctly, as well as some laser cutter tips. We will also be covering how to use the equipment in the seminar room. Room access will be enabled for those who attend the training, subject to faculty approval. If you do not have access to the dgp wiki (https://www.dgp.toronto.edu/dgpwiki/5180MonitorAndCleanup) please let me know. Please email jhancock@dgp if you have any questions. Thanks, -John

1 0

* Reminder * 5180 and Seminar Room training Feb 1st 1:30 pm
by John Hancock 01 Feb '19

01 Feb '19

Hi Everyone, I will be doing an updated hardware training session on Friday, Feb 1st at 1:30 pm. This is an update, so not required for those who already have access but recommended as we will be reviewing useful information about the new 3d printers - Ultimaker3 & Form2, how to print to them remotely and how to dispose of cleaning station fluid correctly, as well as some laser cutter tips. I will also follow it with an introduction to conferencing and recording systems we now have it place in the lab, mostly based in the seminar room. I’ll talk about how to invite remote participants by phone or video, record lectures and run multiple simultaneous input sources to different screens in the room. For people without room access, it will be enabled for those who attend the training, subject to faculty approval. If you do not have access to the dgp wiki (https://www.dgp.toronto.edu/dgpwiki/5180MonitorAndCleanup) please let me know. Thanks, -John

1 0

5180 and Seminar Room training Feb 1st 1pm
by John Hancock 21 Jan '19

21 Jan '19

Hi Everyone, I will be doing an updated hardware training session on Friday, Feb 1st at 1:30 pm. This is an update, so not required for those who already have access but recommended as we will be reviewing useful information about the new 3d printers - Ultimaker3 & Form2, how to print to them remotely and how to dispose of cleaning station fluid correctly, as well as some laser cutter tips. I will also follow it with an introduction to conferencing and recording systems we now have it place in the lab, mostly based in the seminar room. I’ll talk about how to invite remote participants by phone or video, record lectures and run multiple simultaneous input sources to different screens in the room. For people without room access, it will be enabled for those who attend the training, subject to faculty approval. If you do not have access to the dgp wiki (https://www.dgp.toronto.edu/dgpwiki/5180MonitorAndCleanup) please let me know. Thanks, -John

1 0

5180 Door access reset
by John Hancock 14 Jan '19

14 Jan '19

Hi Everyone, We're going to be removing the door access later this week for those users who did not attend one of the training sessions held in the last 4 months (September to December, 2018). If you would like access to 5180, please email dgplab(a)dgp.toronto.edu and I can suggest some training dates later in the month. If you attended training in December, October or September your access will continue. Thanks, -John

1 0

5180 Training Session - Last session Friday the 11th
by John Hancock 09 Jan '19

09 Jan '19

Reminder - final training session for 5180 will be on Friday Jan 11th. There will be other training, probably later in the month or in February, but not before the Jan 16th cut-off. Hi Everyone, Given the number of new pieces of equipment that have arrived and the number of users we now have on the door list we're going to do a mandatory re-training session for 5180 over the next two weeks. Before the Christmas break we will re-program the door access and remove those students who do not attend one of the training sessions held between now and Wednesday Jan 16th, 2019 Training times: Friday Dec 14 1 pm Thursday Dec 13 11 am Tuesday Dec 18th 2 pm Wednesday Dec 19th 2pm Thursday Dec 20th 11 am Tuesday Jan 8th 1pm Wednesday Jan 9th 12 pm Friday Jan 11th 2pm After Wednesday the 16th we will _remove_ the door access for those students who have not attended one of the sessions listed above. I will cover information about the new 3d printer how to print to it remotely and how to dispose of cleaning station fluid correctly, as well as some laser cutter tips and general equipment care. I'll also be talking about the new CNC mill and how to operate it. Following the 5180 training will be an optional introduction to conferencing and recording systems we now have it place in the lab, mostly based in the seminar room (this is _not_ required for access to 5180, only the first part of the training). I’ll talk about how to invite remote participants by phone or video, record lectures and run multiple simultaneous input sources to different screens in the room. If you have any questions, please email dgplab(a)dgp.toronto.edu

1 0

5180 Training sessions - Training today at 2 pm
by John Hancock 18 Dec '18

18 Dec '18

Reminder - training today for 5180 Hi Everyone, Given the number of new pieces of equipment that have arrived and the number of users we now have on the door list we're going to do a mandatory re-training session for 5180 over the next two weeks. Before the Christmas break we will re-program the door access and remove those students who do not attend one of the training sessions held between now and Wednesday Jan 16th, 2019 Training times: Friday Dec 14 1 pm Thursday Dec 13 11 am Tuesday Dec 18th 2 pm Wednesday Dec 19th 2pm Thursday Dec 20th 11 am Tuesday Jan 8th 1pm Wednesday Jan 9th 12 pm Friday Jan 11th 2pm After Wednesday the 16th we will _remove_ the door access for those students who have not attended one of the sessions listed above. I will cover information about the new 3d printer how to print to it remotely and how to dispose of cleaning station fluid correctly, as well as some laser cutter tips and general equipment care. I'll also be talking about the new CNC mill and how to operate it. Following the 5180 training will be an optional introduction to conferencing and recording systems we now have it place in the lab, mostly based in the seminar room (this is _not_ required for access to 5180, only the first part of the training). I’ll talk about how to invite remote participants by phone or video, record lectures and run multiple simultaneous input sources to different screens in the room. If you have any questions, please email dgplab(a)dgp.toronto.edu

1 0

5180 Training sessions - Access RESET after Holiday break
by John Hancock 12 Dec '18

12 Dec '18

Hi Everyone, Given the number of new pieces of equipment that have arrived and the number of users we now have on the door list we're going to do a mandatory re-training session for 5180 over the next two weeks. Before the Christmas break we will re-program the door access and remove those students who do not attend one of the training sessions held between now and Wednesday Jan 16th, 2019 Training times: Friday Dec 14 1 pm Thursday Dec 13 11 am Tuesday Dec 18th 2 pm Wednesday Dec 19th 2pm Thursday Dec 20th 11 am Tuesday Jan 8th 1pm Wednesday Jan 9th 12 pm Friday Jan 11th 2pm After Wednesday the 16th we will _remove_ the door access for those students who have not attended one of the sessions listed above. I will cover information about the new 3d printer how to print to it remotely and how to dispose of cleaning station fluid correctly, as well as some laser cutter tips and general equipment care. I'll also be talking about the new CNC mill and how to operate it. Following the 5180 training will be an optional introduction to conferencing and recording systems we now have it place in the lab, mostly based in the seminar room (this is _not_ required for access to 5180, only the first part of the training). I’ll talk about how to invite remote participants by phone or video, record lectures and run multiple simultaneous input sources to different screens in the room. If you have any questions, please email dgplab(a)dgp.toronto.edu

1 0

5180 and Seminar Room training October 17th, 3:30pm
by John Hancock 11 Oct '18

11 Oct '18

Hi Everyone, I will be doing an updated hardware training session on Wednesday, October 17th at 3:30 pm. This is an update, so not required for those who already have access but recommended as we will be reviewing useful information about the new 3d printer, how to print to it remotely and how to dispose of cleaning station fluid correctly, as well as some laser cutter tips. I will also follow it with an introduction to conferencing and recording systems we now have it place in the lab, mostly based in the seminar room. I’ll talk about how to invite remote participants by phone or video, record lectures and run multiple simultaneous input sources to different screens in the room. For people without room access, it will be enabled for those who attend the training, subject to faculty approval. If you do not have access to the dgp wiki (https://www.dgp.toronto.edu/dgpwiki/5180MonitorAndCleanup) please let me know. Thanks, -John

1 0

F170 replaced
by John Hancock 11 Sep '18

11 Sep '18

Hi Everyone, The F170 printer has been replaced and is available for 3d printing in 5180. We're still testing it and the calibration, so any issues you should be reported to dgplab@dgp about build quality, problems with the alignment, etc. Please include your slice height and the job name so that we can review the job on the printer. As a reminder, there are instructions on http://www.dgp.toronto.edu/dgpwiki/StratasysF170 and videos at http://www.dgp.toronto.edu/3dprint/ on the operation and maintenance of the printer. Thanks, -John

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Hardware