Hardware September 2018

hardware@dgp.toronto.edu

1 participants
2 discussions

F170 replaced
by John Hancock 11 Sep '18

11 Sep '18

Hi Everyone, The F170 printer has been replaced and is available for 3d printing in 5180. We're still testing it and the calibration, so any issues you should be reported to dgplab@dgp about build quality, problems with the alignment, etc. Please include your slice height and the job name so that we can review the job on the printer. As a reminder, there are instructions on http://www.dgp.toronto.edu/dgpwiki/StratasysF170 and videos at http://www.dgp.toronto.edu/3dprint/ on the operation and maintenance of the printer. Thanks, -John

1 0

5180 and Seminar Room training
by John Hancock 05 Sep '18

05 Sep '18

Hi Everyone, I will be doing an updated hardware training session on Thursday, September 6th at 3:30 pm. This is an update, so not required for those who already have access but recommended as we will be reviewing useful information about the new 3d printer, how to print to it remotely and how to dispose of cleaning station fluid correctly, as well as some laser cutter tips. I will also follow it with an introduction to conferencing and recording systems we now have it place in the lab, mostly based in the seminar room. I’ll talk about how to invite remote participants by phone or video, record lectures and run multiple simultaneous input sources to different screens in the room. For people without room access, it will be enabled for those who attend the training, subject to faculty approval. If you do not have access to the dgp wiki (https://www.dgp.toronto.edu/dgpwiki/5180MonitorAndCleanup) please let me know. Thanks, -John

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Hardware September 2018